Hello.
I have a device that runs a Mediatek MT8563 it seems to be running android, but it has a locked launcher and I cannot seem to get another launcher or any other app to install,
I have connected the UART and I was able to get to the boot loader, but I can't seem to be able to access anything else.
anyone here with more experience with these devices?
If I can at least install another launcher it would be amazing!
The device says "Coship N9085i" but I can't find any info other that a few photos.
I also emailed Coship support to ask for a generic firmware, and they said "No" :(
This is what the bootloaded shows:
I have a device that runs a Mediatek MT8563 it seems to be running android, but it has a locked launcher and I cannot seem to get another launcher or any other app to install,
I have connected the UART and I was able to get to the boot loader, but I can't seem to be able to access anything else.
anyone here with more experience with these devices?
If I can at least install another launcher it would be amazing!
The device says "Coship N9085i" but I can't find any info other that a few photos.
I also emailed Coship support to ask for a generic firmware, and they said "No" :(
This is what the bootloaded shows:
Code:
mt8658_base # help
? - alias for 'help'
base - print or set address offset
bdinfo - print Board Info structure
bootm - boot application image from memory
bootm_zImg- bootm_zImg - boot with zImage in memory
bootp - boot image via network using BOOTP/TFTP protocol
chpart - change active partition
cmp - memory compare
cp - memory copy
crc32 - checksum calculation
dis_log - log_enable
ext2load- load binary file from a Ext2 filesystem
ext2ls - list files in a directory (default /)
ext4load- load binary file from a Ext2 filesystem
ext4ls - list files in a directory (default /)
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatloadex- load binary file from a dos filesystem
fatls - list files in a directory (default /)
go - start application at address 'addr'
help - print online help
loop - infinite loop on address range
matchfile- match a file in a directory
md - memory display
mm - memory modify (auto-incrementing address)
mmc - MMC sub system
mmcinfo - mmcinfo <dev num>-- display MMC info
msdc - msdc -msdc performance testing
mt85xx_boot- mt85xx_boot - boot command for mt85xx platform
mtdparts- define flash/nand partitions
mtest - simple RAM read/write test
mw - memory write (fill)
nm - memory modify (constant address)
ota - Reboot and enter recovery mode
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
setenv - set environment variables
tftpboot- boot image via network using TFTP protocol
ubi - ubi commands
ubifsload- load file from an UBIFS filesystem
ubifsls - list files in a directory
ubifsmount- mount UBIFS volume
upg - upg - Upgrade image sub-system
usb - usb - BDP USB sub-system
usbboot - usbboot - boot from USB device
version - print monitor version
Aucun commentaire:
Enregistrer un commentaire