So I needed a case for my S6 edge as I am rather active during the day and while I have never dropped a phone, I didnt want to have an oops moment adn drop this one and break it. Bought a case from Speigen which normally has good reviews... but the case seemed like it was made about 1mm to long and it constantly bugged me that my phone moved around in it a little. But me being cheap and realizing that the case while annoying protected my phone just fine, never replaced it.
Then I got my hands on the RooCase... First impression was seemed decent, about on par with my other case, but seriously how different could it be? Boy was I about to get an eye opener...
Installation: the fit was TIGHT! I actually used a micro screwdriver to help the edges over the phones power and volume buttons. I didnt really need to I found out but as I said this case fits good and tight and I hate putting a lot of side load on small switches and buttons. once on the phone the case is nice and firm. No wiggle at all. Much better than my old case.
Feel: Im not going to get into the technical manes and such, and for that I apologize, but here are my impressions of the case in hand. the back of the case is a lightly textured hard plastic. the top and bottom edge of the back is a rubbery type material. the sides are the same plastic as the back of the case, but with rubber inserts down the middle. I found that the back is a little slick and slides a touch in my hand, but with the rubbery top and bottom it really isn't an issue. I would love to see some sort of rubbery addition or something to the back to aid in anti-slip if I could have everything I wanted... the rubber inserts on the sides, while rather thin, do a wonderful job of adding just enough grip to the device. In the hand the case feels great. No sharp edges, just enough tactile feel, nad good and solid.
Design: The case has small protrusions on the back so that when you lay it down the Camera and such is well protected. these protrusions are formed i the rubbery top and bottom parts and I found that they also do a wonderful job of keeping the device from sliding around on smooth surfaces. the top and bottom edges of the front are also protruding past the device protecting the screen and again keeping the device from sliding, albeit it will slide just a bit easier than the back.
the openings are all well shaped and cut out to perfectly line up with the phones charging, speaker,headphone jack and what ever the two openings on the top of the phone are... Cant remember what they are right now, Oh well... :)
on teh outer edges of the corners there is a larger protrusion of rubber that will protect the phone if dropped on the corners. I dont feel like dropping my phone to test this, but they seem well designed and placed. large enough to add extra protection, but still small enough to flow with the case and phones lines perfectly.
My favorite part of the case design is the buttons. I really love the buttons on this case. Most cases have marks, or molded bumps for the buttons. This case has real, actual freaking metallic buttons! They actually feel better than the phones stock buttons. the power button has two verticle lines cut into the face of it and in the dark it is so easy to slide my finger down the side of the case until I feel that and I know instantly my finger is o the button to either turn on or off the screen or what ever Im trying to do. the volume button is a nicely prominent as well with a nice line cut in the middle to differentiate between up and down. again, very simple and easy to feel with your finger to adjust volume. the buttons are nice and prominent, but still low profile enough to not be a bother. the corner bumpers I mentioned earlier are just a touch wider than the buttons are, so again, everything flows very well.
Protection: well... the case is great. I work in Law Enforcement. we do all sorts of active training adn what not and because of my unit I am always on call so I have to keep my phone with me at all times. I had it in my pocket the other day and my phone took two hits from simunition... the screen was destroyed. instantly and catastrophically. so I figured why not, the phone was already destroyed and going to be replaced... So I set the phone up with the case facing out and hit it a few times with the simunition rounds. the marks on the case wiped right off, and when I puled the case off the phone was undamaged. the case protected the back glass perfectly.
Conclusion: I love this case. The color, fit, finish, details such as the buttons and the level of protection it affords without becoming obtrusive such as Otterbox or lifeproof are exactly what I want and expect in a case. It looks great on my phone, feels great in my hand, slides in and out of my pocket easily with out snagging. I would highly recommend looking into this case if your in the market for one.
Ill add pictures of it later, Im at work right now and cant post them from here.
Then I got my hands on the RooCase... First impression was seemed decent, about on par with my other case, but seriously how different could it be? Boy was I about to get an eye opener...
Installation: the fit was TIGHT! I actually used a micro screwdriver to help the edges over the phones power and volume buttons. I didnt really need to I found out but as I said this case fits good and tight and I hate putting a lot of side load on small switches and buttons. once on the phone the case is nice and firm. No wiggle at all. Much better than my old case.
Feel: Im not going to get into the technical manes and such, and for that I apologize, but here are my impressions of the case in hand. the back of the case is a lightly textured hard plastic. the top and bottom edge of the back is a rubbery type material. the sides are the same plastic as the back of the case, but with rubber inserts down the middle. I found that the back is a little slick and slides a touch in my hand, but with the rubbery top and bottom it really isn't an issue. I would love to see some sort of rubbery addition or something to the back to aid in anti-slip if I could have everything I wanted... the rubber inserts on the sides, while rather thin, do a wonderful job of adding just enough grip to the device. In the hand the case feels great. No sharp edges, just enough tactile feel, nad good and solid.
Design: The case has small protrusions on the back so that when you lay it down the Camera and such is well protected. these protrusions are formed i the rubbery top and bottom parts and I found that they also do a wonderful job of keeping the device from sliding around on smooth surfaces. the top and bottom edges of the front are also protruding past the device protecting the screen and again keeping the device from sliding, albeit it will slide just a bit easier than the back.
the openings are all well shaped and cut out to perfectly line up with the phones charging, speaker,headphone jack and what ever the two openings on the top of the phone are... Cant remember what they are right now, Oh well... :)
on teh outer edges of the corners there is a larger protrusion of rubber that will protect the phone if dropped on the corners. I dont feel like dropping my phone to test this, but they seem well designed and placed. large enough to add extra protection, but still small enough to flow with the case and phones lines perfectly.
My favorite part of the case design is the buttons. I really love the buttons on this case. Most cases have marks, or molded bumps for the buttons. This case has real, actual freaking metallic buttons! They actually feel better than the phones stock buttons. the power button has two verticle lines cut into the face of it and in the dark it is so easy to slide my finger down the side of the case until I feel that and I know instantly my finger is o the button to either turn on or off the screen or what ever Im trying to do. the volume button is a nicely prominent as well with a nice line cut in the middle to differentiate between up and down. again, very simple and easy to feel with your finger to adjust volume. the buttons are nice and prominent, but still low profile enough to not be a bother. the corner bumpers I mentioned earlier are just a touch wider than the buttons are, so again, everything flows very well.
Protection: well... the case is great. I work in Law Enforcement. we do all sorts of active training adn what not and because of my unit I am always on call so I have to keep my phone with me at all times. I had it in my pocket the other day and my phone took two hits from simunition... the screen was destroyed. instantly and catastrophically. so I figured why not, the phone was already destroyed and going to be replaced... So I set the phone up with the case facing out and hit it a few times with the simunition rounds. the marks on the case wiped right off, and when I puled the case off the phone was undamaged. the case protected the back glass perfectly.
Conclusion: I love this case. The color, fit, finish, details such as the buttons and the level of protection it affords without becoming obtrusive such as Otterbox or lifeproof are exactly what I want and expect in a case. It looks great on my phone, feels great in my hand, slides in and out of my pocket easily with out snagging. I would highly recommend looking into this case if your in the market for one.
Ill add pictures of it later, Im at work right now and cant post them from here.
Aucun commentaire:
Enregistrer un commentaire