Lightflow [sort of] works with root on Turbo

I didn't see this posted elsewhere, so here goes.

Lightflow seems to be working with root, albeit with limited functionality. And of course, the Turbo only has a green LED.

I tinkered with the settings a bit with trial and error to get this to work; maybe someone else can find the perfect combination to get it working optimally. Disclaimer: YMMV, you're at your own risk re: breaking something. I haven't used this long enough to assess battery drain or any other adverse effects.

Settings to configure -- everything else was left at the default setting.

First, grant device Notification Access, obviously.

Then in Lightflow:
Under Settings -> Device Settings and Root:
Turn on "Direct mode"
Turn on "Root mode" and then grant access via Superuser prompt
Turn on "Run every command as root"
Turn on "Show LED while screen on"

Under Settings -> LED control:
Main LED control: set to "Control"
Scroll down to "Additional LEDs" and enable "charging control"

Go back to Notificaiton Settings in Lightflow and chose your app/notification of choice.
Scroll over using the top tabs to "Light," and tick "Enable light"
On this "Light" tab, scroll down to "charging LED" and make sure it's set to solid.
Set the charging brightness to "100" -- it didn't work with a couple other arbitrary values that I tried
You can test the notification using the button on the upper right.

I got it to work for SMS and MMS, but didn't try other Notifications.

Again, this is pretty crude. You basically get a static green alert (and I think I got it to flash once, but don't remember the settings... I was just tinkering). If someone wants to spend more time playing around and refining these settings, go for it. And like I said, I don't know if this has adverse effects. Maybe this also means other apps could work; I don't know what else is out there.