ALL CREDIT GOES TO @Manh_IT and INFO CAN BE FOUND HERE IN HIS THREAD... BE SURE TO HIT HIS THANKS BUTTON FOR HIS EFFORTS.
ALL FILES HERE
Download ODIN 3.10.7
Download Noble_Kernel_Auto-Root_N920P_v0.1_Alpha.zip
Download TWRP-2.8.7.1-Alpha_N920T.tar.md5
Download BETA-SuperSU-v2.49.zip
PREP THE PHONE FIRST ...
go to settings>>>about device>>> scroll to bottom and build number 8 times
now press back button once and tap developer options...
make sure USB debugging is on AND OEM UNLOCK NEEDS TO BE ON ALSO .....
Place phone in ODIN / Download mode ( press and hold vol down+home+power for a few seconds...then release and press vol up) and plug the phone to the pc....Watch for ID:COM in top left corner to give an ID.......if none is given then check the data cable or try a different one.... NOTE: once you try a flash and "IF" it fails... you will need to disconnect and power off the phone and go back into download mode again or you will get "Setup Connection" hangup error when re-trying to flash
Now Click the "AP" button and in the pop up window, migrate to the KERNEL and double click it. Wait for it to verify md5 checksum. If bad, re-download the file.
Now check in the OPTIONS TAB.... make sure ONLY Auto Reboot & F. Reset Time are checked...
uncheck Re-Partition ! ! !
Once these steps are followed, click start and wait till you see PASS in the ID:COM Field
After re-boot, follow same steps and flash TWRP
Then either install SuperSU in TWRP by going into recovery by powering off the phone then press and hold vol up+home+power until you see the TWRP splash .... or just install from the market
ALL FILES HERE
Download ODIN 3.10.7
Download Noble_Kernel_Auto-Root_N920P_v0.1_Alpha.zip
Download TWRP-2.8.7.1-Alpha_N920T.tar.md5
Download BETA-SuperSU-v2.49.zip
PREP THE PHONE FIRST ...
go to settings>>>about device>>> scroll to bottom and build number 8 times
now press back button once and tap developer options...
make sure USB debugging is on AND OEM UNLOCK NEEDS TO BE ON ALSO .....
Place phone in ODIN / Download mode ( press and hold vol down+home+power for a few seconds...then release and press vol up) and plug the phone to the pc....Watch for ID:COM in top left corner to give an ID.......if none is given then check the data cable or try a different one.... NOTE: once you try a flash and "IF" it fails... you will need to disconnect and power off the phone and go back into download mode again or you will get "Setup Connection" hangup error when re-trying to flash
Now Click the "AP" button and in the pop up window, migrate to the KERNEL and double click it. Wait for it to verify md5 checksum. If bad, re-download the file.
Now check in the OPTIONS TAB.... make sure ONLY Auto Reboot & F. Reset Time are checked...
uncheck Re-Partition ! ! !
Once these steps are followed, click start and wait till you see PASS in the ID:COM Field
After re-boot, follow same steps and flash TWRP
Then either install SuperSU in TWRP by going into recovery by powering off the phone then press and hold vol up+home+power until you see the TWRP splash .... or just install from the market
Quote:
Originally Posted by rlmiller (Post 62525291) Anyone that tries this and gets bootloops and cannot recover here is a link to the stock tar file.......http://tinyurl.com/pyj328n ...... flash in Odin AP slot from download mode you should recover very easily If that link doesn't work try this link https://onedrive.live.com/?id=D69035...MsVoc2nzE5mTUU Follow my links ....Sprint look for N920P...T-Mobile look for N920T. China look for N920O  Sent from my SM-N920P using Tapatalk |
Aucun commentaire:
Enregistrer un commentaire