Is this a hard brick?? Can you help me out of it?

Hi,

I tried to flash my Moto G 4G - XT1039 with this Roms+Radio Firmware

http://forum.xda-developers.com/moto...p-rom-t3142816

Then there was a bug "E:Error executing updater binary in zip" and in the post above it said I just have to reboot recovery. Well, I did and now my phone seems to be hardbricked :eek:

"When flashing, I get the following: "E:Error executing updater binary in zip"
This is a custom recovery bug. Try restarting recovery and flashing again. Alternatively you may need to:
TWRP > Wipe > Format Data > Yes"

Troubles: Wont turn on, doesnt do ****, like its dead. Battery should be ok.... My Windows Device manager recognizes it as unknown device

Pls help me

Find 7 HARD brick after latest CM12 nightly

I think I might be screwed.

I've been updating with CM12 nightlies about every third of sixth one since the first one and never had a problem. Until today.

Downloaded the 9/21 CM 12 nightly after running my weekly Titanium backup.

Rebooted into TWRP recovery, flashed the zip file for CM12, wiped cached and rebooted. Except the phone rebooted into fastboot. Uh oh.

Phone will no only boot into fastboot, with just the power button = fastboot, power+vol up = fastboot, power+vol down = fastboot.

Plugged phone into computer with USB, PDANet recognizes the phone as having been connected but won't run because adb.exe is installed. Phone shows up in Device Manager with correct driver, listed as Android Device. Phone does NOT show up in Windows 7 Explorer. ADB does NOT work because it doesn't list any devices.

I can run fastboot and all fastboot commands from a command prompt. I've flashed several new recovery images but still cannot reboot into recovery.
I've deleted and updated drivers over and over.
I've pulled battery, SIM card, SD card in every combination I can think of.

In all cases I can only boot to fastboot.

I LOVED this phone! My best phone ever!

Any ideas?

Thanks,

-AJ

AT&T M7, Soft Brick, Desperate for help!

I post as a final measure, as after two days of being unable to use my AT&T HTC One M7, I am in need of help. Badly. I have tried everything I could find, it either errors, fails, or crashes, nothing is working for me. I am without an OS, and have an unlocked bootloader, TWRP, and sleep deprivation. This all started when attempting to update to the newest Android available, and has left me stranded with a soft brick. If anyone has any ideas for me, PLEASE speak up. My phone was working fine until yesterday, and I am NOT interested in going back to my Iphone.

Zenfone 5 Hard Brick

Guys, this is my problem: I have tried root my zenfone and bricked it. I'll explain my infelicity and try get help here.

So, as i mentioned, i tried root my zenfone. I followed this guide But, after done, my phone was in a boot loop. After this, I started a sequence of guides for try recovery, but no success.

List of tutorials that I tried:
https://www.xdablogs.com/2015/07/asu...-recovery.html
After this, my "fastboot" have bricked and now a can't access it. I can't acess the fastboot/droidboot when I press and hold vol up + power the screen show "No command" so I press and hold power + vol up and I can acess this options: reboot system now; apply update from ADB; wipe data factory reset; wipe cache partition; reboot to bootloader/ power down and view recovery logs.

After press and hold: Vol up + Powe buttom I get this.

http://forum.xda-developers.com/andr...od-to-t3131911


So guys, I don't know what doing, my device is hard bricked I need your help for fix it.

Ps.: If I posted in forbidden area, let me know.

S6 Edge hard brick! "Recovery is not seandroid enforcing". Download mode not possible

Hey fellas,

Searched long and wide but haven't encountered anyone with a problem like mine.

Got my S6 Edge today and I flashed it with CF autoroot. Insta-brick!

I can NOT turn it off. Only "reset" it with Vol down + Power, but it immediatly goes back to the black screen saying "Samsung Galaxy S6 Edge" and in little red letters "Recovery is nog seandroid enforcing".

Any fix for this? Literally can't think of anything. Let me know, thanks in advance!

[Q] How to hard brick phone so that knox isn't visible?

I promise this is not a troll post.

Can you flash something through odin/or do something which makes the phone unbootable thereby hiding the knox status and getting warranty?

Help with brick

Can anybody show me how to unbrick a blu studio x D750

Sent from my N9520 using Tapatalk

Possible phone brick

Hello members, so here is my short story, I bought the note 2 close to release date. Within a few days I dropped and cracked it and ended up just buying a used phone. A little later I decided to revive it and get the screen fixed, I think at one point i had it working but that was a couple years ago. I think I might have rooted it, then at some point put it back to normal but I cant remember. I do not remember what version I have on it or if I did take the 4.3 with the locked bootloader. I have tried all the tricks out there I can find, including trying to get Kies to see it and do a recovery and also using Odin 3.10 with the .pit and root 66 vzw stock. All I get after using Odin is a reboot, the samsung logo then black screen. I can not seem to get recovery to open, just Odin which shows

ODIN MODE
Project Name: SCH-I605
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
Know Warrenty Void: 0
RP SWREV: A2

Not sure what my next steps should be

Thanks

Soft brick because of AT&T update?

Just got a update for my LG G Flex D950 from AT&T. I didn't think twice, and hit update. Now my phone will only go to TWRP. I'm using TWRP v2.8.6.0 any suggestions? All I've done is root it, it has the original ROM it came with.

nexus 5 hard brick

my nexus 5 not responding at all ....nothing is happen when i press nd hold power button or volume and power button :(...i just install something size about 30 mb cm 12 nd then reboot nd then nothing happen ,...plz help me

Strange brick or what???

Hi there
Got strange problem with my friend's Galaxy S2 I9100.

One day it gone hot and then turned off. Now it stucks in Samsung Galaxy SII logo and when I get into recovery I have a lot of red warnings (photo below):
Attachment 3475964

I tried to flash stock ROM, but Odin can't flash it:

Code:

---

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XXMS7_I9100OXAMS7_I9100XXMS2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

---

Tried on Odin 1.3, 1.83, 1.85 and 3.09 - all the time the same error.

Tried to flash PIT file with KI3 3-file firmware but..

Code:

---

<ID:0/025> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/025> Odin v.3 engine (ID:25)..
<ID:0/025> File analysis..
<ID:0/025> SetupConnection..
<ID:0/025> Initialzation..
<ID:0/025> Set PIT file..
<ID:0/025> DO NOT TURN OFF TARGET!!

---

And nothing else.......

Phone gets into Download Mode or stucks in Samsung Galaxy SII logo.
Now I can't get into recovery :/

As my friend told me, he had Android ICS on it so I think he had insane chip with brickbug.
But.. he didn't flash any custom roms, custom kernels etc. He only upgraded his i9100 from GB to ICS.

Any ideas? :crying: :crying: :crying: :crying:

Attached Thumbnails

 

S5 editing build.prop brick adb offline

Hi.
I have a Galaxy S5 SM-G900F with stock room and rooted. Clockworkmod v6.0.4.8
I edited the file build.prop and when I reboot, the logo Samsung appears and doesn't start.
I have installed Samsung drivers and Minimal ADB and Fastboot, and if I connect other phone the commands work. For example, I have connected a S3 and if I write "adb devices", I can read recovery, then I can write "adb shell", but when I connect my S5, it appears closed.

By this reason, I installed PhilZ Touch 6.26.6 with oddin, and when I go to recovery and write "adb devices", now I read "offline" instead "recovery". The word has changed but I can't access anyway.

I've tried click in mount /system, mount USB storage. I think that when S5 worked, USB debugging it was enabled because I could access through Wondershare, but now I don't know how get it says "recovery".

I have a lot of tab opened and I am confussed.

I'd like to know how to change the build.prop file (and delete last line that I added) or what to do.
Anyway I am downloading a stock version to flash, but then I think that I would lose some files or WhatsApp converstations... I have done a backup to another sd card just in case I could restore later.

Now, I just to install TWRP. Now in adb put "device", then I think that I can do something with this.
When I click in Mount, are selected Data and Cache, but I can't select "USB Storage". Furthermore with PhilZ Touch and TWRP when I do recovery put "Recovery is not seandroid enforcing".

Can somebody help me please? Or tell me the commands? Thank you!!

Fixing phone from hard brick?

Is there any possible way to fix a hard brick on this phone (surnia)? I applied an OTA update but I had the wrong bootloader installed and the phone will no longer turn on. I read somewhere I need the moto USB drivers, mfastboot, the correct firmware, as well as the riffbox jtag drivers but I haven't been able to find the specific instructions for this processor.

Brick nexus 4 after flash bootloader

Hello,

I have tried to back on Kitkat on my nexus 4 but after flashing bootloader, my nexus doesn't boot.

Steps I follow :
1 - fastboot oem unlock ==> OK
2 - fastboot flash bootloader bootloader-mako-makoz30d.img ==> OK ?
3 - fastboot reboot-booloader ==> KO, smartphone doesn't boot

I have a black screen. When phone is plugged on AC and I press Power + Volume down for a while (15sec), a red LED blink.

Console output :
sending 'bootloader' (2203 KB)...
OKAY [ 0.078s]
writing 'bootloader'...
OKAY [ 0.297s]
finished. total time: 0.391s
rebooting into bootloader... OKAY [ 0.000s]
finished. total time: 0.016s

Any solution ?

Thanks in advance.

Ascend Mate soft brick (I think)

Dear all, I would reset my Mate and did a factory reset from Android Menu. After that the phone was going to the TWRP Recovery. So I didn't read further tutorials and thought a full wipe would not a bad Idea. But sadly I did not found the old Custom Image ZIP file and would install the factory default firmware. UPDATE.APP. After some doings I lost my TWRP Image (I think by swiping) and now I have only the HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0 running.

When I try now to update of UPDATE.APP from SDCARD, the error is, the Agent can not mount. I was trying two SD Cards. fresh formatted.

Are all sizes compatible? Or do I have to use a small SD card?

Did I Brick My new Galaxy Tab S?

First I rooted using CF-Auto-Root by Chainfire Root was verified working used the tablet for a couple hours. Then I booted into TWRP and did a back up and factory wipe then installed IronRom When the installation was complete it said rebooting but TRWP seemed to freeze. So I held the power button until it turned off. It automatically rebooted to the Samsung GALAXY TAB S boot image and thats now where its stuck. If I Hold the power button it does nothing. If I hold the volume down with the power button it shuts off for about a sec or 2 and come right back to the Samsung GALAXY TAB S boot image and stays there. Is there any hope for me?

Model is a T800. was running 4.4.2.

HELP ME PLEASE!!!

I have had serveral devices this is the first time anything like this has happened.

[Q] Changing the motherboard can fix a hard brick?

Hey Guys.

Changing the motherboard can fix a Moto G hard bricked?

[Q] Which type of brick am i working with?

OK so i have a bricked D800. I have been reading through thread looking to get it unbricked. For the different types of bricks they were working with and the ones described i'm still in confusion as to which one i have.

Symptoms:

Fastboot the device appears in the device manager as "Fastboot Interface (Google USB ID)"

In download mode it comes up under 'modems' with the label "LGE AndroidNet USB Modem"

also when its in download mode it appears under 'Ports (COMs &LPT)' with the label "LGE AndroidNet USB Port (COM41)" i set it to COM41.

Also Fastboot does not execute any command.

It enters download mode with a "secure booting error"

Thankful for any help you provide.

HTC One M7 Hard Brick Help

Hello Everyone

Today my phone just gave up. When it died I assumed it did not have any charge and tried to charge my phone but it just wouldn turn on. I havent rooted my phone or installed anything out of the ordinary. Here is the list of things I have tried.
1. Try all possible button combinations with/without power
2. Shine a bright light to the sensor and try the power button
3. Connect it to a windows laptop(my device manager doesnt show anything)

I suspect it might be a hard brick with the hardware at fault.
Could anyone please let me know the following.

1. Would it be possible to fix my phone?
2. If not, would it be possible to extract the data in my phone? (I dont care if i lose my phone, I just need the data).
3. Any service that you guys recommend that I can use that would help me recover my data? (mobiletechvideos?)

I know I should have backed up my stuff but I just returned from an International trip and I dont want to lose those photos.
Help me out guys.

Kindle Fire HD 8.9" Slow boot and possible Brick

I've had my Kindle Fire HD 2nd Gen for a long time, really since it first came out. I've never had any issues with it until now. I try to boot up my kindle and it takes way longer to get passed the boot screen then it usually does. If I do get passed the boot screen, the lock screen takes forever to unlock, and if that actually works, I can't access apps, Music, or really anything on my kindle besides settings. I can't turn the wifi on my kindle, and I can't reset it to factory defaults.