I had an issue with my phone and resolved it, this is me sharing this particular error and solution.
First the Problem:
I had my ZL running low on charge and the next morning it would not react to anything.
Open the backcover of the device (i used the IFIXIT disassembly guide).
You dont need to remove the main curcuit board, you just need to disconnect the flex-cable of the battery shown in the picture below, the pink marker shows the battery connector (top right).
.medium.jpg)
I bent the connector so that it was accessible with my universel charger, which looks like this

I connected the two marked connectors go to the + and - on the flex-cable of the battery and the charger signaled that it was charging the battery.
I guess you can use any universal charger of this fashion. Do not use your standard usb charger, it's dangerous!
After 10-20 minutes i reassembled the phone and was able to charge it normally, start it up, etc.
I'm no expert but this is what I think happend:
A completely drained and at the same time worn out battery did not allow chrging the divice. Mine was 20 months old. The phone controls the charging process I think, so maybe there was not enough power left for that.
I will be replacing my devices battery with a new one and I suggest the same I you have had the same problem.
I hope this helps :)
sterussus
First the Problem:
I had my ZL running low on charge and the next morning it would not react to anything.
- pushing buttons (and a combination of buttons, like power+volumeup) did not work
- connecting it to the charger
- connecting to pc did not show the device or trigger a reaction (did not show up in device manager)
Open the backcover of the device (i used the IFIXIT disassembly guide).
You dont need to remove the main curcuit board, you just need to disconnect the flex-cable of the battery shown in the picture below, the pink marker shows the battery connector (top right).
.medium.jpg)
I bent the connector so that it was accessible with my universel charger, which looks like this
I connected the two marked connectors go to the + and - on the flex-cable of the battery and the charger signaled that it was charging the battery.
I guess you can use any universal charger of this fashion. Do not use your standard usb charger, it's dangerous!
After 10-20 minutes i reassembled the phone and was able to charge it normally, start it up, etc.
I'm no expert but this is what I think happend:
A completely drained and at the same time worn out battery did not allow chrging the divice. Mine was 20 months old. The phone controls the charging process I think, so maybe there was not enough power left for that.
I will be replacing my devices battery with a new one and I suggest the same I you have had the same problem.
I hope this helps :)
sterussus
Aucun commentaire:
Enregistrer un commentaire