moto g xt1033 hardbricked help me!!

HI,
i have flashed android 4.4.2 on my moto g xt1033 from my stock android,it was all fine and nothing happened
it rebooted and finally booted up to lockscreen.
then it asked me to update to 4.4.4 and i clicked yes,it downloaded it and started to install it and started to reboot the device
there was a little android logo below there is a progress bar filling up with green clolor ,it finished and it shutdown

thats it now it dosent even start or even show me the boot logo,i also ried to go to fastboot mode but no use

please help me with this!!!!!!!!

Recover hard-bricked device (Karbonn a4)

I recently agreed to help a friend on repairing his mobile and I succeeded. but I tried different options and mistakenly deleted the system files. so now all that displays is the boot logo and goes directly into recovery mode. Can anybody help me to recover it? better, if someone could provide me with a backup from the same model so I can simply apply it from SD card.
P.S. it was rooted before going into hard brick stage!

[HELP] "Almost" Hardbricked G3

So everything started, when I installed an Xposed Module which "supposedly" enable Lockscreen Widget on LP lockscreen... Well I installed and enabled it, the second I open the app, my phone crashed.

After this, my phone seemed stuck in a bootloop! However, my phone started behaving oddly during boot time, eg it wasn't bootlooping, but completely turn off.

So I went to TWRP to perform a factory Reset, and even after that, my phone wasn't booting well! When I succeeded booting, arriving at the "select language" screen, my phone make a super hissing sound (through the speaker) like a corrupted thing, everything froze and I pulled out the battery.

I tried flashing a .kdz through LG Flash Tool but it always fails! (I use Win10)

Things started to get worse! I was even getting the green screen saying Kernel failure and other stuff when trying to boot!

I went to TWRP and cleared everything (system, data, etc) and tried reflashing my rom (Cloudy G3 2.5), BUT, during the installation, my phone froze!! and it turned off by itself! Since then, download mode doesn't work, and I can boot to TWRP only when the phone is cold and Charging through AC.

I am scared to try flashing a ROM again... In case it just freeze again and make the situation worse!! :( Please guys help me! I am stuck on TWRP right now...


Situation summary:

• Can't boot
  


• Download Mode not working
  


• Only TWRP working (but can potentially freeze if I flash something.)

Help! Galaxy tab 4 8.0 hardbricked boot

Hi, this is the first threat i make (if something is wrong please moderators correct me :) )

Im doing this on tab 4 8.0 T331 3g version

Okay i'll begin explaining how did i get to the tablet totally useless by only being recognized with the sound when connects but nothing more.

I was trying ot restore my EFS.img via terminal emulator, i found a short tutorial where it said that only doing this: dd if=/storage/sdcard/efs.img of=/dev/block/mmcblk0p3 bs=4096

well once i did that it said: write error: no space left on device

well i said, doesnt matter, maybe a reboot will fix it... nope. it didnt. it just went black screen and never turn back on, so i was in the QHSUSB_BULK and it never installed the drivers, so i downloaded qualcomm drivers and installed, but now it doesnt even recognize my device, tried uninstalling driver and it didnt helped.

so i was looking for solutions and found that famous ATF tool, and found the "debrick" SDC for my tablet but i cant install it to my sdcard because i dont have the box that does that. so i decided to find any "sdc to img" converter so i can place it to my sd card and try to boot my tab, i couldnt find anything that could do that.

so, what i need? a debrick.img that anyone can take out from its tab 4 t331, i've read that it can be done with this: https://www.androidfilehost.com/?fid=23329332407577222
i quote: "its a debrick img creator hosted by Surge (thanks) hopefully this one will work"
it can be flashed via recovery and it takes out a debrick.img, if someone can upload that for me, i would make a bootable sd card with it so i can place it on my tab and then i can re flash it with odin.

If i can get it to work i will make the tutorial so everyone can be advised to avoid this problem

Thanks in advanced

Hard-bricked my moto G - need help.

Hello fellas,
I had few problems with my Moto G. I was on official Moto lolipop.
I've unlocked bootloader, flashed TWRP, flashed SlimRom from dev thread, but it was hard to boot (bootlooping after phone restart, I was forced to turn down, and then turn on the phone, and sometimes it was booting) and I wanted to flash other rom, without ,,hard boot" problem.

And there is how I bricked my phone.

When I tried to wipe data in TWRP (factory/cache wipe) my phone reboots suddenly. It didn't wipe anything. It just reboot my system. I tried many times - always ending with reboot.
So, I tried to flash AICP rom without wiping anything. I installed it, and I had ,,android.acore has stopped working" error. Phone was rebooting often.
I tried to wipe my data again, without succeed. It was rebooting, and I've seen all my apps I had installed before.
I though it was TWRP fault, so I flashed CM recovery. Same thing occured. Next, I flashed CWM recovery. Same situation (reboot after choosing wipe).
So, I deleted my userdata and cache from fastboot, and tried this to solve my problems :
http://forum.xda-developers.com/moto...lipop-t3077806
Unfortunetly, it didn't helped me. Now I have one big bootloop.
What to do? Help me, please.
Thank you for your time!

Any service centre in UK than can unbrick a hard-bricked (bootloader) Galaxy A5 ??

I'm pretty sure I hard-bricked my Galaxy A5 - A500FU (same as here).

Is there any service centre in UK that can unbrick a hard-bricked Galaxy A5?

Thanks.

Hardbricked Xiaomi Mi 4i

Hey guys, I've hardbricked my Xiaomi Mi 4i...

the device can't boot into fastboot mode
no led
no charging animation
doesn't get recognized by pc
only blank screen...

i've already done some researches about testpoint method of unbricking it... But unable to find the testpoints of the device... help me guys... :( :( :(

Hardbricked my BLU Studio 5.0II

Hey guys, I believe I have hardbricked my BLU Studio 5.0II D532U.
It cannot turn on, and the computer will not detect it.
This happened because I accidentally downloaded a new Preloader.bin using SPFlashTools.

Can anyone help, or is my phone really a dead cause expensive piece of brick?
Thanks :<

An issue with my hard-bricked S2

I've flashed a custom rom on my Samsung Galaxy S2 i9100 phone, it was for an i9100g so my phone is hard-bricked. I'd like to hear any possible ways to make it work if possible.

Anyway I saw this topic and I'd like to know if that could work on my S2 phone(?)