Hello, idlike to share my solution. I had a big problem, i finaly get a new phone and wanted get rid off my Xperia X10 Mini Pro, but i wanted to keep my SDcard. Unfortunatelly i make a lot of kernel flash and tryed several roms then i keep GingerDX, but i couldnot boot phone without SDcard in it. So i spend some time to find solutions, tryed to somehow move xrec, clocwork and other files to internal storage but without luck. Then i get my hands on Sony PC Companion, with this application u can repair any Sony device to his original state.
Prepare atleast 5GB of free space on your C: Drive, yes on your C: drive, because this app dont offer custom install path, i know its realy shame, its even more shame if its appears in company like Sony.
U still need SD Card for this, but after repair u wont needed SD card anymore and phone will be bootable again.
Instructions:
-Download and Install SPCC -support.sonymobile.com - tools - download ( I would post link but i am new here, and have some restriction, so u need to find by yourself )
-Turn OFF your phone and wait 5 sec or just take out battery and plug back
-Do not plug USB yet, just open SPCC and Run Support Zone (It will download some additional components)
-Run Update Software, it will prompt dialog "etc:Phone is not recognized", click on repair phone/tablet
-Follow instruction in SPCC, SPCC will download and prepare all files, choose type of your phone and u will get on Connecting screen
-If u pass connection when u holding right combination given by SPCC u can continue, in my case i couldnot connect with SPCC because i had ClockworkMode nAa kernel, so with that combination (right button 'back' and plugin usb) i get only to CW, u will actualy pass to second SPCC conecting screen, where SPCC says u need to swipe bar on top and allow usb, ofcourse i couldnt do that in CW, so simply go to 'Advanced Settings' and choose 'Reboot Recovery', litle light above display should lights green as it remains connected to SPCC, now u should have no problem and SPCC will complete repair process.
- after SPCC is done u can unplug USB and turn your Phone On
- wait few minutes, first start can take really long time, and u are ready to go now u can remove SD card without any problems at next start.
Also make sure batery is atleast 45%-65% charged, depend on condition of your battery. Make sure your USB cable is working without problem, in my case i needed to get diferent because original cable had some contact issues, and disconected few times during update/repair, dont worry SPCC interupt and wait till u connect USB back, in this case u are already connected with SPCC so disconnecting will lead only to popup dialog with reconnect button, u dont need to do all the process again.
I apologize if something like that is already there but i found verry difficult find solution and i didnt find any here. Also sorry for my bad english i am just begginer.
Prepare atleast 5GB of free space on your C: Drive, yes on your C: drive, because this app dont offer custom install path, i know its realy shame, its even more shame if its appears in company like Sony.
U still need SD Card for this, but after repair u wont needed SD card anymore and phone will be bootable again.
Instructions:
-Download and Install SPCC -support.sonymobile.com - tools - download ( I would post link but i am new here, and have some restriction, so u need to find by yourself )
-Turn OFF your phone and wait 5 sec or just take out battery and plug back
-Do not plug USB yet, just open SPCC and Run Support Zone (It will download some additional components)
-Run Update Software, it will prompt dialog "etc:Phone is not recognized", click on repair phone/tablet
-Follow instruction in SPCC, SPCC will download and prepare all files, choose type of your phone and u will get on Connecting screen
-If u pass connection when u holding right combination given by SPCC u can continue, in my case i couldnot connect with SPCC because i had ClockworkMode nAa kernel, so with that combination (right button 'back' and plugin usb) i get only to CW, u will actualy pass to second SPCC conecting screen, where SPCC says u need to swipe bar on top and allow usb, ofcourse i couldnt do that in CW, so simply go to 'Advanced Settings' and choose 'Reboot Recovery', litle light above display should lights green as it remains connected to SPCC, now u should have no problem and SPCC will complete repair process.
- after SPCC is done u can unplug USB and turn your Phone On
- wait few minutes, first start can take really long time, and u are ready to go now u can remove SD card without any problems at next start.
Also make sure batery is atleast 45%-65% charged, depend on condition of your battery. Make sure your USB cable is working without problem, in my case i needed to get diferent because original cable had some contact issues, and disconected few times during update/repair, dont worry SPCC interupt and wait till u connect USB back, in this case u are already connected with SPCC so disconnecting will lead only to popup dialog with reconnect button, u dont need to do all the process again.
I apologize if something like that is already there but i found verry difficult find solution and i didnt find any here. Also sorry for my bad english i am just begginer.
Aucun commentaire:
Enregistrer un commentaire