Model id check fail while trying to flash new firmware

I'm trying to flash 7.19.401.22 firmware with no red text, & I've also tried 7.19.401.2 with the same result.
S-OFF, cid: 11111111, model id: PN0720000.
Current ROM/Kernel: ViperOne 9.0/ElementalX 19.2.
Have tried on Windows 10 and WinXP

C:\sdk\platform-tools>fastboot flash zip firmware.zip
target reported max download size of 1514139648 bytes
sending 'zip' (29678 KB)...
OKAY [ 2.334s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 2.750s

C:\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.01.20.1225
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.23.651.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: *************
(bootloader) imei:***************
(bootloader) meid: ************
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4288mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.096s

Thanks for any help. I've tried searching but no answers for my particular situation(correct cid/model id)