Hello Everyone, i got a note 3 phone
SM-N9005 FCC ID: A3LSMN9005
SSN:- N9005GSMH
MADE IN VIETNAM BY SAMSUNG..
i bought this note 3 phone from UAE and it was with Kitkat 4.4.2 and when i was using it, some apps used to stop and not responding and get a pop-up message "System has stopped" or something like .com.system has stopped responding, also when i open some other apps the phone shuts down, so i turn it on, sometimes it works fine and sometimes it stops responding and shut down many times, so i had to make a full restore factory reset and still have the same problem, some guys told me you have problems with the rom, so i had to look for stock roms to it and found a lollipop rom under this name (AP_N9005XXUGBNL8_CL3643614_QB3415922_REV00_user_l ow_ship_MULTI_CERT.tar) and i installed samsung usb drivers just to make sure that everything is okay.
so when i started flashing it by odin it said Fail, so i tried once again but failed again, and i found my phone went to that black screen with (firmware upgrade encountered an issue, please select recovery mode in kies & try again), i couldn't get to my previous kitkat rom after that, but i'm able to go to download mode and recovery mode, so after this( brick) i had to search of how to unbrick it so after that i flashed philz as a recovery mode, and then flashed (All samsung recovery.tar) so then after flashing it, that message of (firmware upgrade encountered an issue, please select recovery mode in kies & try again) is gone, but i got another loop of restart each time i open the phone, it is not booting it is only taking me to the black start screen of android, and after a while it restarts itself.. and then when i tried to flash the same rom once again and connected my phone to my computer drivers, started configuring and so i waited to finish, but it failed it said (MTP USB Device Failed), though i still can see the phone connected over Odin in download mode.
so i had to look for another rom which is a kitkat stock version (N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar) which i found after downloading it and flashing it to my phone that it is for n900, which is normally failed flashing!.
so I don't know if i messed things up or not, and i really don't know what else or more to do ?
please give me your advice so i can restore this phone to its original stats.
Thank You!
SM-N9005 FCC ID: A3LSMN9005
SSN:- N9005GSMH
MADE IN VIETNAM BY SAMSUNG..
i bought this note 3 phone from UAE and it was with Kitkat 4.4.2 and when i was using it, some apps used to stop and not responding and get a pop-up message "System has stopped" or something like .com.system has stopped responding, also when i open some other apps the phone shuts down, so i turn it on, sometimes it works fine and sometimes it stops responding and shut down many times, so i had to make a full restore factory reset and still have the same problem, some guys told me you have problems with the rom, so i had to look for stock roms to it and found a lollipop rom under this name (AP_N9005XXUGBNL8_CL3643614_QB3415922_REV00_user_l ow_ship_MULTI_CERT.tar) and i installed samsung usb drivers just to make sure that everything is okay.
so when i started flashing it by odin it said Fail, so i tried once again but failed again, and i found my phone went to that black screen with (firmware upgrade encountered an issue, please select recovery mode in kies & try again), i couldn't get to my previous kitkat rom after that, but i'm able to go to download mode and recovery mode, so after this( brick) i had to search of how to unbrick it so after that i flashed philz as a recovery mode, and then flashed (All samsung recovery.tar) so then after flashing it, that message of (firmware upgrade encountered an issue, please select recovery mode in kies & try again) is gone, but i got another loop of restart each time i open the phone, it is not booting it is only taking me to the black start screen of android, and after a while it restarts itself.. and then when i tried to flash the same rom once again and connected my phone to my computer drivers, started configuring and so i waited to finish, but it failed it said (MTP USB Device Failed), though i still can see the phone connected over Odin in download mode.
so i had to look for another rom which is a kitkat stock version (N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar) which i found after downloading it and flashing it to my phone that it is for n900, which is normally failed flashing!.
so I don't know if i messed things up or not, and i really don't know what else or more to do ?
please give me your advice so i can restore this phone to its original stats.
Thank You!
Aucun commentaire:
Enregistrer un commentaire