Found a way to get PVS and BIN

It took forever and it was hidden in a bunch of code. It wasn't very good, but battery had 15%, and was running hot, so I'm trying again. This is only for rooted phones. Anyways your going to see a lot of junk. Around the 32nd line of code you'll see your PVS and Bin number. Here is mine as an example. Instructions are obviously at the top and you need to restart twice. I'd advise a cool phone before doing this. I've done this hot on my OPO and had a completely different numbers, but I just got root and been trying to find a way to do this for 2 hours. Enjoy and press thanks if you feel I contributed...


u0_a114@clark:/ $ su
root@clark:/ # dmesg PVS /proc/kmsg

[ 0.321220,0] i2c-msm-v2 f9924000.i2c: error probe() failed with err:-517
[ 0.321258,0] platform f9924000.i2c: Driver i2c-msm-v2 requests probe deferral
[ 0.322412,0] i2c-msm-v2 f9967000.i2c: probing driver i2c-msm-v2
[ 0.322501,0] i2c-msm-v2 f9967000.i2c: error on clk_get(core_clk):-517
[ 0.322520,0] i2c-msm-v2 f9967000.i2c: error probe() failed with err:-517
[ 0.322548,0] platform f9967000.i2c: Driver i2c-msm-v2 requests probe deferral
[ 0.322971,0] i2c-msm-v2 f9926000.i2c: probing driver i2c-msm-v2
[ 0.323054,0] i2c-msm-v2 f9926000.i2c: error on clk_get(core_clk):-517
[ 0.323073,0] i2c-msm-v2 f9926000.i2c: error probe() failed with err:-517
[ 0.323100,0] platform f9926000.i2c: Driver i2c-msm-v2 requests probe deferral
[ 0.323804,0] i2c-msm-v2 f9927000.i2c: probing driver i2c-msm-v2
[ 0.323887,0] i2c-msm-v2 f9927000.i2c: error on clk_get(core_clk):-517
[ 0.323906,0] i2c-msm-v2 f9927000.i2c: error probe() failed with err:-517
[ 0.323934,0] platform f9927000.i2c: Driver i2c-msm-v2 requests probe deferral
[ 0.324108,0] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
[ 0.324139,0] msm-thermal qcom,msm-thermal.65: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
[ 0.325125,0] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
[ 0.327351,0] platform f9015000.qcom,cpu-clock-8992: Driver cpu-clock-8994 requests probe deferral
[ 0.345717,0] qcom,rpmcc-8992 fc401880.qcom,rpmcc: Registered RPM clocks.
[ 0.355476,0] qcom,gcc-8992 fc400000.qcom,gcc: Registered GCC clocks.
[ 0.364191,0] qcom,mmsscc-8992 fd8c0000.qcom,mmsscc: Registered MMSS clocks.
[ 0.365302,0] i2c-msm-v2 f9924000.i2c: probing driver i2c-msm-v2
[ 0.365432,0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.365451,0] i2c-msm-v2 f9924000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.367725,1] i2c-msm-v2 f9967000.i2c: probing driver i2c-msm-v2
[ 0.367858,1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.367879,1] i2c-msm-v2 f9967000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[ 0.371847,1] i2c-msm-v2 f9926000.i2c: probing driver i2c-msm-v2
[ 0.371988,1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.372007,1] i2c-msm-v2 f9926000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.373674,1] i2c-msm-v2 f9927000.i2c: probing driver i2c-msm-v2
[ 0.373802,1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.373821,1] i2c-msm-v2 f9927000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)


[ 0.375704,1] cpu-clock-8994 f9015000.qcom,cpu-clock-8992: using A53 speed bin 1 and pvs_ver 0
[ 0.375744,1] cpu-clock-8994 f9015000.qcom,cpu-clock-8992: using A57 speed bin 0 and pvs_ver 0
:mad:

Hopefully I did something wrong and I'm not really a 0 and a 1...