[FTF] Xperia C3 D2502 5.1.1 Lollipop Firmware files.

The Sony Xperia C3 is a touchscreen-enabled Android smartphone designed, developed and manufactured by Sony Mobile Communications. Codenamed "Wukong" and the successor to Sony Xperia C, it features a Snapdragon 400 processor.
The Xperia C3 was announced on July 8, 2014, marketed as the "world's best selfie smartphone". Unlike other Sony smartphones, it has a 5MP front camera, as well as a 8MP rear camera. It was released in August 2014, starting in China and followed by other markets.
Pre-requisites:

• Before we go any further, Please check your phone model number by going to Settings -> about phone -> Model number, If yours match this Number D2502, Then you are good to go.


• Make sure your phone's battery is above 50% charge.


• Original USB cable.

How to update your Sony Xperia C3 Dual D2502 to Android Lollipop 5.1.1?

• To make sure Sony drivers will install properly on your PC, Download the latest version of Sony PC Companion from here and install it.


• Download Flashtool from here and install it.


• Download Sony FTF file from one of the links provided below :

Russia (Customized RU) AndroidHost - AndroidFileHost
Generic Saudi Arabia (Customized SA) AndroidHost - AndroidFileHost
Generic India (Customized IN) AndroidHost - AndroidFileHost
Generic Middle East (Customized MEA) AndroidHost - AndroidFileHost
Generic Ukraine (Customized UA) AndroidHost - AndroidFileHost
Generic Vietnam (Customized VN) AndroidHost - AndroidFileHost
Generic Singapore (Customized SG) AndroidHost - AndroidFileHost
Generic Thailand (Customized TH) AndroidHost - AndroidFileHost

• Now go to C:Flashtool and run Flashtool.exe, Click on the Flash icon in the left, Select Flashmode and press OK.


• From the source folder in the top navigate to the folder where you downloaded the FTF file earlier and press OK.


• Select the FTF file from the Firmware menu and click Flash.


• Now wait until a window prompts asking you to plug your phone with USB cable.


• Power off your device.


• Press the volume down button and plug the USB cable, The update should begin...


• Wait until the update is completed, Unplug the USB cable and reboot your device.
  The first boot should take some time...
  Now you have successfully update your phone.

If you want an other customized version, Don't hesitate to contact us at admin@sonyfirmware.com or via our Contact page here and we will add it very soon.
For more Follow us at Twitter @SonyFirmware