Hello where can I get the OEM digitizer assembly including the lcd and glass? Ty

Hi I really love this phone but accental me and my phone didn't got along. LOL Anyway's so I need a digitizer assembly incluyding the spen sensor film, lcd, glass and so forth the full package. Like this but in usa but oem because I don't trust aftermarket one which I want the full amoled and everything. OEM im aiming. The link that is coming from hk so don't know if i should risk it i reather go with oem Ty http://www.ebay.com/itm/Gray-Amoled-...-/131341326774

Notification led stopped working after digitizer replacement

Hello,


I recently replaced my digitizer and now i got everything back working but i get no notification leds.
Can it be because of the cheap chinese digitizer i used? or did i disconnect / broke somethine while the phone was open?


Thanks

ZTE Nubia Z5s Touch Digitizer Problem

I have nubia Z5s with official ROM, here nobody sells ZTE replacement parts so I bought touch digitizer from china and replaced by a local mobile shop. Most of the time touch works fine, no missing area or any problem but it stops working randomly and again works fine by detaching and re-attaching the digitizer connector. I checked for the loose connection, but its seems fine, also hard reset the mobile but no improvement. It happens two or three times a day.
Any help will be appreciated..

ZTE Nubia Z5s Touch Digitizer Problem

Hi,
I have nubia Z5s with official ROM, here nobody sells ZTE replacement parts so I bought touch digitizer from china and replaced by a local mobile shop. Most of the time touch works fine, no missing area or any problem but it stops working randomly and again works fine by detaching and re-attaching the digitizer connector. I checked for the loose connection, but its seems fine, also hard reset the mobile but no improvement. It happens two or three times a day.
Any help will be appreciated..

Broken screen & digitizer, help with adb?

So I have an encrypted Nexus 5 loaded with TWRP custom recovery. Unfortunately, the screen and digitizer are broken. I see there is a tool to control my phone from my computer, but it requires usb debugging enabled. I also see I can enable usb debugging from adb, and I can see just barely enough to get into recovery mode from the bootloader. However, I am unable to see or enter the pin for the screen pattern from TWRP (because of the encryption). I do have access with fastboot at the bootloader. Am I out of luck or is there any way to proceed at this stage?

digitizer lol

suddenly he started for me being failing
youtube.com/watch?v=mMtKujwR3tM (i cant post link)

Broken Screen & Digitizer, Can't Unlock Pattern or Allow ADB

Hello, I have a Galaxy S4 i337 running 4.4.4 Kitkat. It is stock rooted. I have broken the screen and digitizer, so I cannot see what is on the screen and there is no touch input. I need to access some data on the phone like the calendar, some device contacts, and possibly some other things that I can't think of right now. I do not have the calendar set to sync, and some of the contacts are not synced with Google. The phone has a pattern lock with a backup pin. I know the pattern and possibly the backup pin, but I can't input them due to no touch input and I can't see the display. I have an MHL connector that shows the display on my TV, but I can't provide any input. I also have a USB OTG cable and a mouse and keyboard, but input with these devices is essentially useless since I can't see what's on the screen at the same time. :mad:

I was going to try the "Android Control" Windows app that I found here at XDA, however, I am unable to unlock the phone and then allow the PC to connect to the phone using ADB. I am referring to the "Allow USB debugging?" prompt. I believe USB debugging is enabled. Wifi is turned off, and bluetooth is turned off. I was thinking that I may be able to connect a bluetooth mouse and use the MHL adapter at the same time, but I can't enable bluetooth. I do not have a Samsung account, so I can't use the find my phone or whatever it's called to unlock it. Does anyone have ANY ideas of what I can try to gain access to the device? :fingers-crossed:

nexus 7 digitizer area?

I'm planning on doing a nexus 7 2013 install on my car, but the area I've got to install the tablet is really limited. Ideally I'd have to cut ~1 cm off the lower corners of the nexus.

After watching a bunch of teardown videos, I can see I'll have to relocate the wifi module, and some of the other boards which is no big deal.

The only issue is the digitizer. I won't be cutting nearly far enough to go into the screen, but will cutting the corners off break the digitizer, or is it only active above the lcd?

i.imgur.com/ySop52N.jpg
i.imgur.com/9abdPrZ.jpg

the location in question:
i.imgur.com/2AqCjvd.jpg

WLAN Problem after change the Digitizer

Hello guys.

my problem is following:
after my frontglass broked i had changed my full Digitizer (not just the display)

Now I'm 3-5 meters away from my wifi router and have connection problems.
1. the signal is at 25-50% (5 meters away from the router)
2. If I go to another room, I have no more connection now.
What can I do to fix this?

Device: C6603
Digitizer: No more original
OS: CM12.1 (Android 5.1.1)

[Q] GT-N5110 digitizer sensitivity

I just replaced the digitizer on my GTN-5110, and it lacks enough sensitivity on half the screen to be used in my OtterBox. If I pull it out of the case, the whole screen works fine. Also, if I use the S Pen, it works fine inside the case.
I realize this is probably a cheap knock off part and I may have to buy something a little better, but in the meantime I was wondering did any custom ROMS offered screen sensitivity adjustment? I can't find any setting in the stock ROM, and Google just turns up a setting for the Galaxy note 3.
Any help greatly appreciated.