S6 Wifi Fail after Custom Rom Install

Hi guys,

I've just recently (over the weekend) installed VaderRom on my S6, but after I installed the custom ROM (not after root/kernel flash, which was a few days before) I can no longer use WiFi. The phone connects to the Wifi – not problems there, the connection is "Very Good" – but it absolutely refuses to transmit any data over the network. Every internet based app says I'm not connected to the net.

I have a G920I, which I had already updated to stock 5.1.1; Flashed the unikernel appropriate to my model (no issues), got Root, custom recovery, etc. Then, later, I decided to install VaderRom – no issues with install, and everything worked fine. Except WiFi.

Tried XtreStroLite as well, just to see if anything changed, but no joy.

Tried flashing a new bootloader and modem (currently this one: http://forum.xda-developers.com/gala...pport-t3154861), but no change.

Have now restored to a nandroid backup from before the custom ROM flash, but I still can't get any data over Wifi.

Soooooo............ Does anyone have any ideas? I've Googled, I've searched these forums, I've looked for the last few days for a solution, but I've not seen a single post that seems to cover this issue.

Cheers for any help!

Galaxy s3 nand write start fail odin

Every time I try and flash my bricked s3 i900 in odin I receive this nand error. I have tried using several different stock roms for my device. I have also used several pit files. None of these have worked. Any help would greatly be appreciated.

CPU fail?

woxter sx 100
Procesador Gráfico: PowerVR SGX 544MP
Resolución: 1024x600 (16:9)
CPU: OctaCore Cortex A7 2.0 GHz
RAM: 1 GB DDR3
Memoria Interna: 16GB

1800? would have to be 2048? :mad:


setcpu

Smart Lock Fail With Moto 360

hello,

i am using my Note 5 with a 1st gen Moto 360. disabled power botton lock and set the watch as a trusted device.

My phone still locks while it's connected. Anybody using this combo?

Sent from my SM-N920T using Tapatalk

Smart Lock Fail With Moto 360

i think i posted in wrong section

hello, <br />
<br />
i am using my Note 5 with a 1st gen Moto 360. disabled power botton lock and set the watch as a trusted device. <br />
<br />
My phone still locks while it's connected. Anybody using this combo? <br />
<br />
Sent from my SM-N920T using Tapatalk<br/>

Sent from my SM-N920T using Tapatalk

Android Lockscreen Fail Hack Exploit

Apparently you can crash the phone allowing full access once it recovers:
http://www.dailymail.co.uk/sciencete...es-unlock.html

country code causing text messages to fail

HI everyone.
Sorry for the second post in a few days, but this is an annoying issue

I have a verizon galaxy s6, and I am currently living in Belgium, using belgian sim (carrier BASE). I don't think this issue is unique to the country or the carrier.

The problem I am having is that when I receive a text message from a belgian number, the number that shows on my phone has the country code: +32 xx xxx xxxx. I can get text messages like this, but when I try to reply, the message fails. (this has happened on every number ive tried to respond to.) The only way I can get my texts to send is by making the number into a new contact, and removing the +32 country code. The same goes for when i'm trying to call, I have to remove the country code, if I keep it, the call fails. I've tried turning on and off assisted dialing, and I did a factory reset on my phone. Ive tried dialing US numbers and they have also failed, so it's not forcing the +1 country code on my numbers while calling either.

This is a huge pain, because it forces me to make a new contact for every single new number, even if its not a number I need/want to keep, and go in and adjust it manually.

Thanks for the help, it's very appreciated.

Seriously low space under 9‰ apps may fail to install even I have free space.

I can't install a large app . In storage settings says :
INTERNAL STORAGE :
Total 8gb
Firmware Rom 2gb( 0 free),
System Rom 1gb (free 0.4 gb),
User Rom 1,97GB(free 200 MB,
Apps are here ) ,
User virtual SD card 2,85(free 1.65 gb)

USER VIRTUAL SD CARD:
Available 1.65 Gb,
Apps 1.3 gb, etc.

EXTERNAL SD CARD:
Total 8gb, available 1,24 Gb
Apps 1,03gb etc.

I have default save location on SD, I have restarted play store, apps are installed on user Rom. When I delete a large app user Rom has more space. I have 1 Gb free on internal and external memory. How to use this memory for default save location and not user Rom (it is only 2 gb), Or how to extend partitions? System is lagging and a notification says I have not free space. Zte v975

Seriously low space under 9‰ apps my fail to install even I have free space.

I can't install a large app . In storage settings says :
INTERNAL STORAGE :
Total 8gb
Firmware Rom 2gb( 0 free),
System Rom 1gb (free 0.4 gb),
User Rom 1,97GB(free 200 MB,
Apps are here ) ,
User virtual SD card 2,85(free 1.65 gb)

USER VIRTUAL SD CARD:
Available 1.65 Gb,
Apps 1.3 gb, etc.

EXTERNAL SD CARD:
Total 8gb, available 1,24 Gb
Apps 1,03gb etc.

I have default save location on SD, I have restarted play store, apps are installed on user Rom. When I delete a large app user Rom has more space. I have 1 Gb free on internal and external memory. How to use this memory for default save location and not user Rom (it is only 2 gb), Or how to extend partitions? System is lagging and a notification says I have not free space

hidden.img fail (910h)

When upgrading to the latest 5.1.1 firmware on odin, it fails after hidden.img

any solution?

Model id check fail while trying to flash new firmware

I'm trying to flash 7.19.401.22 firmware with no red text, & I've also tried 7.19.401.2 with the same result.
S-OFF, cid: 11111111, model id: PN0720000.
Current ROM/Kernel: ViperOne 9.0/ElementalX 19.2.
Have tried on Windows 10 and WinXP

C:\sdk\platform-tools>fastboot flash zip firmware.zip
target reported max download size of 1514139648 bytes
sending 'zip' (29678 KB)...
OKAY [ 2.334s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 2.750s

C:\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.01.20.1225
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.23.651.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: *************
(bootloader) imei:***************
(bootloader) meid: ************
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4288mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.096s

Thanks for any help. I've tried searching but no answers for my particular situation(correct cid/model id)

Odin Fail

I have been trying to root my note 3 SM-N900 for several hours today and I am getting quite frustrated.
dropbox.com /s/tmwphjs3muyhad9/tempFileForShare_2015-09-09-17-41-40.jpg?dl=0[/IMG]


Here are the steps I have followed.

1. Enabled USB debugging.


2. Started Downloaded mode & connected to oden.


3. Tried to flash CMW recovery (ticked only "F.Reset Time" checkbox & added cmw file to AP).

• Product name:SM-N900


• Current Binary: Samsung Official


• System Status: Official


• Reactivation Lock(KK) : ON


• Secure Download : Enabled


• KNOX Warranty void : 0


• RP Swrev: A4

The program shows this:

Code:

---

<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

---

Any ideas? Am I using the wrong Odin version? Or am I downloading the wrong recovery file ? Is my phone too up-to-date to be rooted? Any help is appreciated.Thanks.


1. ODIN : sh.st/cxfh7 - Odin3 v3.10.0.exe
2. CWM Recovery : sh.st/cxfvM - n900-cwm-recovery-6.0.5.0-kk(0812).tar
3. Samsung USB Drivers :sh.st/vHIqL


I used this video as a reference.
youtube.com/ watch?v=eDHSXn5KwAw

help Samsung GT-i9195 FAIL! (Ext4)

Hi all.
my Samsung wont turn on, when trying to turn on the phone it shows the Samsung logo screen then dies and does the same thing over and over (just stuck in a loop)

I have tried in installing "Galaxy S4 Mini LTE GT-I9195 BTU I9195XXUCOD3 Android 4.4.2 23.04.2015 4770408" from samsung-updates.

i have downloaded and extracted the file from the site given hereinbefore and i'm usingOdin3.

i can add the phone to Odin3 but just keep getting the message given hereinafter;

I don't know if i'm doing it right, have the right file or just being a NOOB.

Can someone please help me.

I thank you for your time in advance and apologize for the ambiguous question


<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCOE3_I9195H3GCOE1_I9195XXUCOE3_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> NON-HLOS.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)

hidden.img FAIL!

Hi there,

Just flashed the wrong ROM for my SM-G361F, So I decided to flashing the STOCK ROM back, but everything goes fine except a hidden.IMG failure on Odin, does annyone know how to fix this?

Thanks in advance!

Galaxy Player 3.6 (US) Thread Fail, bricked.

Hey everyone
note that this is my first post so I can't post it in any dev threads so I must post it here, sorry.

Today, I tried to install custom firmware onto my YPGS1 (US version with capacitive touch home button). The firmware I am trying to install is http://forum.xda-developers.com/gala...od-10-t3046129, cyanogenmod 10 for the 3.6. I followed the instructions but got a completed 0 success 1 failed thread. (using Odin3 1.85, the version designated in the original thread for the rom. I've tried other versions and they don't detect the player) I tried twice and decided to just stop but I couldn't get out of download mode, so I force rebooted (I think i just held down the power button, but I might've taken out the battery) and now when I turn it on its stuck at a "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" screen with a phone with 2 dots to the left going to a yellow error triangle and then a computer screen. The good news is that it appears to still be in download mode, but I still can't install a rom. I've tried a different usb cable, different usb port, completely different computer, and tried multiple different roms. I get the same issue.
Any help will be greatly appreciated. Thanks!

G901F flash odin fail

Hi, so this is my first flash.. my phone came with Android 5.0.2 which is very slow compared to Kitkat, so I tried to flash a 4.4.4 rom for G901F but odin says it failed:

Code:

---

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

---

So now my phone is stuck with the "Firmware Upgrade encountered an issue. Please select recovery mode in kies & try again." error. Does anyone know what does that error mean and is there anything I could do now? Is it because I tried to flash an older rom over my newer one?

Thanks!

S4 camera fail after update to Stock Firmware Lolipop 5.01

After i update the firmware from 4.4.2 to 5.01 lolipop, the camera app, updated the firmware of cam, and only a black screen on try to use camera app, or other any camera app....

The camera firmware information:
Rear Camera (Main)
Cam FW Ver: S13F0SAGB39
Phone FW Ver: S13F0SAGK01

Front Camera
Cam FW Ver: S5K6B27X
Phone FW Ver: S5K6B2YX

The front camera stay working, but main camera, only a black screen.

I tryed reflash the 4.4.2 firmware, but the camera app, don´t reflash the camera firmware.

Have a way to force or manual reflash the camera firmware?

Thanks in advance any help. A hug!

Need helps for TOT file error message "Media Information Check Fail"

I have follow the step form ht tp://xn--3dkza782uwtr.seesaa.net/article/406273061.html

and of course I have installed the newest Qualcomm USB driver 9008.

However, I just find th mentioned error message "Media Information Check Fail".

I am sorry to say that I just forget the previous verson of my L24 phone.

Can I find it on any label? Or, does any solution work for my trouble?

Appreciate for your assistance.

:highfive:

Odin FAIL! Need some help please.

Hello all,
I have a Samsung Note 4 from sprint. I tried rooting my phone earlier and then it just began to restart over and over. I researched and found some solutions which none have worked thus far. Maybe someone can help me out. Current things that I have tried.
1. Rebooted the device and did a factory reset and clearing the cache hoping that would fix the problem. The phone just continued to restart.
2. Next I downloaded the original firmware for my device that I found. The name was GalaxyNote4/SM-N910P/5.0.1/N910PVPU1BOB7_N910PSPT1BOB7_SPR.zip I tried using this and got the Fail! using Odin3 V 3.10

Here is what the Log says:
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Any help would be much appreciated, thank you for your time.

Help! --> N910T Odin PIT Partition FAIL

So my new Note 4 was in a bootloop when I bought it. So I researched and used odin with cf-autoroot and twrp to flash cyanogenmod. This fixed the bootloop.

But I want stock. So I downloaded these:

From this thread: http://forum.xda-developers.com/note...overy-t2902574
And then tried flashing the full firmware. It failed saying "missing pit" or something.

So I searched and apparently *.pit's for N910T are rare and the one's that have been posted by users on XDA have been removed because they were bricking.

I proceeded to search for a *.pit and found this: http://www.droidviews.com/how-to-ext...alaxy-devices/
I extracted the *.pit using adb shell when in TWRP, downloaded pit magic, and then compared my pit with another user's n910t pit in the comments.
User's PIT:

My PIT:


So seeing as they were the same if not extremely similar, I added the pit along with the full firmware and tried again on Odin.


Am I supposed to use the other firmware files and such when flashing with a pit at the same time? Like the bootloader, modem, etc.?


All I want to do is to re-partition the whole device, and "flash"/restore the stock firmware.

Thank you guys for your time reading this; sorry for my "flashing illiteracy" or what not...