hard bricked device

hi so my samsung galaxy s4 GTi9505 internatinal version got hard bricked will the jig usb force it into download mode and from there i open odin then flash the officail rom :confused:

lg g2 bricked

hello, i just tried to flash cloudyg2 3.3 and i have bricked my d802 16gb. i had stock lp and had rooted and installed twrp did the wipes (no internal), got the right lp bootstack and used the right settings, so i really dont know what went wrong.

the symptom is that lg logo show for a fraction of a second and then a washed out gray on top of screen that fades away slowly. also while connected in pc it reads like many many drives.

on the bright side i can enter recovery/download modes. in my original attempt i used the bumbed sign, on my tries to fix it i also used the loki one, same deal.

seems like i have no recovery file, i thought i did it with one of the programs i installed, but since i am newbie seems like i misunderstood. so no recovery file

any help? ;)

Urgent! phones is bricked and odin keeps giving me a error code

The error code is
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)

Bricked Xperia Z1 ???

So, i have a rooted Xperia Z1 with .157 stock deodexed ROM.
Never unlocked the bootloader, only rooted it.
The thing is, yesterday i used it to shoot some pics, put it in the pocket, and 1h later it was dead.
Tried all button combinations, even tried the red button near SIM tray. Nothing happens. connected it to charger, to PC, tried flashtools and does not recognize it. Even tried to connect as flashmode and fastboot mode, nothing happens, no notification LED, nothing... Also removed the battery and connect it again... still the same...
Any help would be awesome guys ;)
Thanks

Am I bricked?

So I wanted to restock and relock my phone, and was following a terrible guide. Here's what I did.
I flashed boot.img via fastboot, I relocked the bootloader, Then flashed the zip. I'm Bootlooping now.
I didn't know that verizon stopped the allowing of unlocking bootloaders so I can seem to flash anything else
via fastboot.
Am I screwed?

Soft Bricked phone! Help.

My Device: g900A - Rooted -4.4.2 Xtreme Dynamic Kat 1.1 - safestrap 3.75 - Based on G900FZHU1ANI2 firmware

My goal was to run [ROM] [5.0] [OC7] TMS5 3.0

I followed the Instructions at [ROM] [5.0] [OC7] TMS5 3.0 Page http://forum.xda-developers.com/att-...29-15-t3095987 which first told me to use muniz_ri's method to get rooted lolypop. - [How-To] Update to G900A_OF3 - 5.0 and KeepRoot http://forum.xda-developers.com/att-...proot-t3149146 I did the Flashfire method and everything seemed to work fine until I got to the part where I needed to use Odin. I flashed the G900A_OA1_Bootloader using Odin's PDA/AP slot.
and got SECURE CHECK FAIL : aboot

So currently my phone is soft bricked. I Am not able to enter recovery, I am only able to get into the downloader.
In the notes in muniz_ri's process there is information about unbricking which tells me to flash the G900A_Downgrade_to_NCE.tar using Odin's PDA/AP slot
I got an error when i tried to flash G900A_Downgrade_to_NCE.tar SECURE CHECK FAIL : PIT
I tried adding a seperate pit file with a firmware that has ap, cp, csc SM-G900A 4.4.2 G900AUCU1ANCE Firmware
Still the same error SECURE CHECK FAIL : PIT

At this point Ive done a lot of research and I am at a lost at why Odin keeps failing. Ive tried updating my usb android drivers, different usb slots and tried a different cable. not sure what to do next.

Nexus 7 major issues, may be bricked, guides don't seem to account for my problem

Hi, this forum seems pretty active, which is exciting! Hopefully someone can help me out here. I have searched a bunch and see a lot of similar things to my problem, but I'm running into issues that aren't really described by anything else I am looking at.

Quick background
The device is a 2013 Nexus 7, Wi-Fi version. I never unlocked/rooted the device, so it was basically factory settings. On Thursday everything was working fine. Later that day, it started showing the message "unfortunately the process google.process.gapps has stopped" as soon as I unlocked, even after rebooting. I was not launching any apps. I could navigate for about 1 second every time I hit "OK" on the error before it popped back up, so I tried all the fixes I had found online for the problem (clearing app cache/preferences, disabling/enabling download manager, etc). I decided just to wipe the device and reset from factory defaults. I wasn't confident in the Factory Reset working correctly while the error kept popping up, so I booted into Recovery Mode and just decided to do the Factory Reset from there.

The reset seemed to freeze, but eventually the device rebooted and I got the text "erasing" with the animated robot. This will stay that way for forever, though sometimes it eventually turns into the android icon with the red exclamation mark.

The current problem
Right now, if I boot the device normally, it will show the google logo, then go into "Erasing", which animates. If I hit Power+volume up, it seems to be "erasing /data" but it never gets further than that. If I turn it off, it will turn itself back on and go back to erasing. I have left it on for 14+ hours and it never progresses, other than the times it sometimes stops showing "Erasing" and instead just goes to the red exclamation mark.

I can get to the bootloader menu by holding volume down+power. If I select recovery mode, it shows the Android animating logo (no text) and if I hit Power+Volume Up it shows "Formatting /data..." in the bottom. Eventually this fails and recovery mode will pop up with the following text at the bottom:

Code:

---

Formatting /data...
E:failed to mount /cache (Invalid Argument)
Formatting /cache....
E:failed to mount /cache (Invalid Argument)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to mount /cache (Invalid Argument)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
etc for last_install, last_kmsg, log, and then repeated all again 1 more time
E:Failed closing /dev/block/platform/msm_sdcc.l/by-name/misc (I/O error)
E:Failed to mount /cache (Invalid argument)

---

If I select "Factory reset/wipe" now, it shows the following:

Code:

---

--Wiping data...
Formatting /data...
then all of the above errors again

---

I tried downloading and installing the Nexus Root Toolkit and running the "Flash Stock + Unroot" iwth the "Soft-bricked/bootloop" option, but all it seems to do is restart the device a bunch of times and then get stuck on "erasing 'userdata'...

Code:

---

Flash Stock + Unroot...
 --------------------------------------------------


sending 'bootloader' (3911 KB)...
FAILED (remote: Bootloader is locked.)
finished. total time: 0.008s
rebooting into bootloader...
OKAY [  0.006s]
finished. total time: 0.007s

sending 'boot' (7256 KB)...
FAILED (remote: Bootloader is locked.)
finished. total time: 0.008s
rebooting into bootloader...
OKAY [  0.007s]
finished. total time: 0.008s

erasing 'cache'...
OKAY [  0.145s]
sending 'cache' (4664 KB)...
FAILED (remote: Bootloader is locked.)
finished. total time: 0.153s
rebooting into bootloader...
OKAY [  0.007s]
finished. total time: 0.008s

sending 'recovery' (7860 KB)...
FAILED (remote: Bootloader is locked.)
finished. total time: 0.007s
rebooting into bootloader...
OKAY [  0.007s]
finished. total time: 0.008s

erasing 'system'...
OKAY [  0.732s]
sending 'system' (822754 KB)...
FAILED (remote: Bootloader is locked.)
finished. total time: 0.740s
rebooting into bootloader...
OKAY [  0.007s]
finished. total time: 0.008s

erasing 'userdata'...

---

Any suggestions on how I might be able to repair my device? It seems completely screwed up, I have no experience with the flashing/bootloading stuff.

Thanks!

Possibly bricked? Only recognized on computer as Fastboot osprey S

So I was trying to flash the correct factory firmware onto my phone, using this guide. The sparsechunks all failed, but I still continued. Now my phone only halfway has the bootloader working. As I said in the title, it connects to my PC as a device but I can't use the cmd commands that the guide showed anymore. Any help to factory reset my Moto G 2015?

Phone bricked ?

Hi guys,
Today I tried to flash a stock rom but my phone won't boot in recovery,
After several trys, I runned the command Fastboot oem device-info and it says that my bootloader was locked,
Or I unlocked it as soon as I received my OPT and since one hour it won't stop rebooting in bootloader (after lunching the command fastbood oem unlock, it says "OKAY")
What do you guys think I can do ? Should I just pack it and send it to OnePlus ? Or there is a way to fix this problem ? All I can do is access to the Fastboot Mode but my Bootloader seems locked... :'(
Thanks for you help !

Please Help with Bricked SGH-I317

I've had this old note II pretty much since it came out have had plenty of ROMS on it and normally have had no problems. I recently had SlimKat on there and I was having battery life issues so I reinstalled it to no avail, so then I tried moving to Blisspop and that fixed the battery life issue some but I was having issues with crashing and the proximity sensor not registering during calls. I found a thread with this issue that directed me to Shift Kernal as a solution to the proximity sensor and crashing issues. I reflashed Blisspop, flashed the Shift kernel, then Gapps and now I have a brick. Upon turning on the phone it gets stuck on the Samsung boot screen. It won't open CWM recovery anymore to access my nandroid backups. I can get it into download mode but I cannot get my computer to recognize the phone as a USB device anymore. I have tried different drivers, cords, usb ports, and even different computers so I assume thats not the issue. Any suggestions would be helpful or even just telling me its a definite hard brick so I'll quit tinkering with it.

Phone is bricked need help

Hey guys I was listening to music in my car last night when the music started to skip. The phone restarted and now stays on the galaxy s6 screen saying recovery is not seandroid enforced. I was using this rom for a good few months and never had a problem. I can go into download mode so I tried to odin back to stock but I get stuck at writing nand start everytime. I'm not sure what to do anymore. Ive switched usb ports and even tried to odin on my labtop and desktop still no go. Anyone can give me some help or maybe has had this happen to them. Any help will be appreciated.

another newbie soft bricked his new phone

i just upgraded my phone from a crappy lg l70 to a htc one x+ i bought from newegg here is the link to the one i bought: nevermind cant post links as a new user

though the phone i received has the at&t symbol on the top i tried to flash the rom im using the clockwork recovery now cause i tried to go with viper rom ended up wiping os by mistake when i skimmed and read wipe the phone :P my bad and then i tried going with cynogen and downloaded its stable release and stable release recovery id like to do the viper rom viperX+_2.1.1 is the one i downloaded to try to get and ive tried the adb push ive tride to sideload and ever the viper kernal recovery flasher exe file

i dont have an os and need some help any help is appreciated and sorry in advance for not using another thread ive tried things ive found in atleast 6 other threads and nothing has quite worked for me

LG G2 is bricked nothing happens

i was loading cloudy g3 a while ago and then my g2 just stopped working
when i plug the phone in the computer nothing happens. Just a red light that doesn't stop blinking. please help me. ive looked this up and nothing shows up

Need help with LG Volt 2 [Bricked]

Hi everyone! I got a problem with this phone. Whenever i try to enter a section on the settings app the app crashes. I already looked for the stock rom but i couldn't find it. If someone could give me a link to it i would appreciate it.

Stock Nexus 7 stock in boot loop (soft bricked) Help!!

I update my Nexus 7 (2013) to Android 5.1 lollipop and it never was able to reboot back to its normal state. It hangs at the google screen for hours. I can enter fast boot mode and I hot recovery, start, or restart boot loader same thing hangs up on google logo. I cant find A way out of this. I check all over the internet and download so many software's basically all of them are require either me to have USB debugging active or an unlocked boot loader which I have neither as the device is completely stock. Please someone help me find a way out of this mess.

Other info:

Response to USB and computer recognizes it in fastboot mode.
Variant - flc 32G
Version - rev_e
Bootloader version - FLO-04.05
Serial number - 059b5e34
Signing - Yes
Secure Boot - Enabled
Lock state- Locked

USB debugging not active
Device is stock and has never been unlocked or rooted.

OPT Bricked

While trying to root my OPT I have done something terrible here.

Able to :
Boot into fastboot mode.

Not able to :
- Boot into phone
- Boot into recovery
- When trying to normal booting, phone just keeps into booting in loop.

Cannot flash recovery because fastboot device info says , device unlocked : false

When I try to unlock oem it just puts the phone into booting loop.

Please help out guys.

Urgent!!!!! Bricked LG L Bello

So,It is very urgent cause i need my phone..I rooted it yesterday now i wanted a custom recovery i saw the terminal emulator method did it and wanted to try it out..I booted to the recovery and only thing I can see is a black screen I can't define if it's on or off but at times when I have it connected to my PC i can hear the sound of it connecting and disconnecting. Please guys someone help!!

my tab pro 8.4 has been soft bricked, can anyone help me?

I'll start from the beginining.. Okay so since i bought my tab (3 months ago) i had a battery problem, but it wasnt a bad battery problem. Once it got to 95% battery it stopped charging. Anyway, about a week after that i was unhappy with the performace of touchwiz on my tab so i decided to root it and install the cyanogenmod 12 nightlies. I was happy with cm for a while but eventually i got bored of all the bugs and instabilities so i decided to switch to a touchwiz rom.. This touchwiz rom was a vast improvement from the stock touchwiz so i decided to keep it. However i still wanted to improve the performace so i researched online for apk's/zip's that could improve my tabs performace. I came across crossbreeder and people said it was really good so i decided to install crossbreeder through TWRP. Once installed i rebooted my device and i instantly found many more battery problems. For example my battery would go from 50% to 20% in 5 mins/my battery would run out and i would reboot it and it would have had 40% etc. I downloaded some battery calibrating apps and calibrated my tab. After all that, that battery wasnt so bad. It was still dodgy but no where near as bad as it was straight after installing crossbreeder. Anyway, this was about 1 month ago. Since then, no new problems had occured with the battery until last night. Last night, my battery ent don to 1% then turned off like it should. I put my tab on charge and rebooted however when it rebooted nothing would work. My touchscreen didnt work, my home button didnt work, none of the keys next to the home button didnt work. So i thought that this was no problem and i could just boot into TWRP, factory reset and install the backup that i made. When i tried this, i booted into TWRP successfully however i couldnt press any of the TWRP buttons, again, i thought that this could be solved by flashing the stock firmware through odin. I put my tab into download mode and connected it to my pc, then flashed the stock rom. Once finished it showed a 'pass' and i thought everything was sorted.. When my tab booted up, it again, didnt let me press anything and none of the buttons would work. This is when i panicked. I then went into the stock recovery to factory reset my tab to see if that would work however, when i went into stock recovery, i couldnt go up or down using the volume keys.. So my volume keys didnt work either. I next put my tab in download mode and connected it to my pc. I opened odin and checked the 'Nand erase all' box thinking this would fully reset my whole tab. I then researched the 'nand erase all' function to find that everyone said that it breakes your device and puts it in bootloop etc. After reading this i instantly disconnected the usb from my computer to my tab. I tried rebooting my tab to see if it still booted and it didnt.. (i waited 20 mins). I then ran odin with 'clear efs' box ticked on. Again it didnt boot. I went into stock recovery again to see if the volume keys would work.. they didnt.. Infact when i opened stock recovery it had 3 errors showing (which it didnt last time i opened stock recovery). They all started with 'failed to mount /data'. Now i am here.. Sorry it was such a long read, i thought it would be better if i explained in detail. Thanks to anyone that replies/helps me.

Phone bricked, please help.

I tried researching for information on this but wasn't able to resolve it. Basically, i have the same problem as here; Flashed a ROM, but after flashing it I found out I did it for the wrong model (5833 instead of 5803). When flashing the rom I wiped Dalvik, Cache, Data and System, and now I'm stuck at the Sony startup screen. It won't let me go into recovery mode.

I too tried to flash stock using flashtools, but it tells me "INFO - Device Status: NOT FOUND". I tried using the Sony PC companion restore function but I get the same problem, telling me there's no phone/device connected.

Is there anything to do?

Bricked G3 stuck at "Factory Reset Status"

When using LG Flash Tool to flash a .tot file, everything went smooth till it boots MiniOS and Shows the blue screen "Factory Reset Status"

Now I can't seem to get beyond this level

I check that it's COM41, using the original cable, plugged to a USB 2.0 port, rebooted PC, etc, but it's stuck at "Waiting For connection when trying again".

Can anyone help me boot successfully?