[Q] Will the qualcomm quick charge 2.0 works..?

Hi guys,
I think I'm going to buy a moto x play, can anyone of you confirm or deny that quick charge 2.0 will work..? I'm asking this because I can get a quick charge 2.0 charger for about 10 Euros, 13 Euros less than a motorola turbo charger. I've looked into qualcomm's site, but moto x play isn't on the list of devices that support quick charge 2.0.

[Q] S6 Fast Charge - Qualcomm charger

Hi, I purchased a Galaxy S6 Edge whilst abroad and got a 2pin adaptive fast charger with it.

I'm back in the UK and was looking to buy the Adaptive fast charger off Amazon.co.uk however for two of the sellers I saw a load of negative reviews about the charger breaking after a while or it bursting/overheating and burning up and that they are not actually original Samsung fast chargers.

Now I don't really want to walk into an actual Samsung Store and buy myself a charger from them as I'm guessing it'll cost somewhere between £20-30.
- If there are any other sites that actually do sell legitimate Samsung Fast Chargers please do let me know!

I found a popular Quick Charger 2.0 on Amazon which has very good reviews as well as users using it on the S6 and is reasonably priced - http://www.amazon.co.uk/Qualcomm-Cer...qualcomm+quick

I just have a few questions about using other Quick chargers (2.0) and not the original fast charger on the S6 edge.
1) Will this be unsafe in anyway to use on the S6 Edge, as in it possibly getting too hot etc or would you not recommend using a 3rd party charger and just stick to an original samsung fast charger

2) The quick charge mode on the charger gives out 9V/2A, compared to the Samsung Fast charger which outputs 9V/1.67A. Will a quick charge (2.0) charger cause any harm to the phone or battery by outputting more power than the original Samsung fast charger does?

3) The charger I linked has 3 output modes. Output: 5V/2A, 9V/2A, 12V/1.5A - Since S6 edge supports fast charging will it just use the 9V/2A output or will it get to use the 12V/1.5A output and will this in anyway harm the battery or phone?

4) Could I use the linked quick charger longterm without any problems to the device (I really do plan to keep this phone for a few years).


If there are any other Fast Chargers/Quick Chargers that are compatible and better than the one I linked please do let me know.

Thanks for your all your time! :highfive:

Anker PowerCore+ 10050 With Qualcomm Quick Charge 2.0 Review

Anker PowerCore+ 10050 With Qualcomm Quick Charge 2.0 Review



https://www.youtube.com/watch?v=Z_i2KRhz5Bk

How to enable Qualcomm diagnostic port on Lenovo Qualcomm phones

Hi,

Can any body tell me how I can activate the Qualcomm diagnostic port on Lenovo phones?

I have Lenovo S90 with IMEI zero problem so I would like to fix this via qpst.. So please advise. Thanks

Preloader or loader mode for Qualcomm chips

We know that mtk chips have a preloader mode, so that we can recover our phone from 99% of worst cases similarly rock chip has loader mode , but do we (Qualcomm chip devices) have any such mode, so that we can recover from worse cases??

Sent from my SM-G530H using Tapatalk

Sent from my SM-G530H using Tapatalk

ARC S (AKA LT18I) file for Debricking Tool / Qualcomm Tool Pack V2-2

Hi
ARC S LT18i MSM8255 12W10 boot locked allowed root = 0, i damaged the trim area throught TA editor of FlashTool :P
After read all the thread i conclude, to have dbload.pl working, i need to correct the write address( it is ok), now to find the mbn file (QPST extraction) and hex file converted in .bin (how to backup it somewhere).
Is there any luke for somebody with an ARC S and nice mind want to provide those files like it is explain in this thread ?
http://forum.xda-developers.com/show....php?t=2136738
the V2.2 of the tool is available in the middle of the thread .


Thanks you to take time to read me and hope read you back :)

Adreno 420 Drivers from Qualcomm site

Hi,

I currently use a custom TW based firmware for my 910F based upon POF2 firmware. I'm a software developer and developer an app that uses OpenGL ES 3.1. Now I have a problem which seems to be connected to the old version of the Qualcomm Adreno 420 drivers that came with the ROM. Every shader I want to compile fails with the error: "Built-In invariance mismatch". Those shaders worked on the same phone with all 4.4.x based ROMs before. So I now wondered if I can use Adreno 420 drivers for the Nexus 6 (Uses Adreno 420 as well) downloaded from the Qualcomm developer page (drivers from August 2015) and just flash the file to my phone? I already looked inside my system folder and the files on my phone are the same just much smaller and older versions. I'm a little scared if a break everything if i try this. So maybe someone with a little experience with Android drivers for GPUs can tell me if this will be possible?

Best Regards,
CommanderXXL

UNITEK 4 Port Charging Dock with Qualcomm 2.0 Quick Charge Review

Our Review of the UNITEK 4 Port Charging Dock with Qualcomm 2.0 Quick Charge.




https://www.youtube.com/watch?v=-khUUMW0FMw

Thanks for watching!

[Q] Preloader mode or loader mode on Qualcomm chips

We know that mtk chips have a preloader mode, so that we can recover our phone from 99% of worst cases similarly rock chip has loader mode , but do we (Qualcomm chip devices) have any such mode, so that we can recover from worse cases??

Sent from my SM-G530H using Tapatalk