Request: Paranoid Android 5

If someone can then please port Paranoid Android 5 to this device.
Thanks a lot

S3 in bootloop after install Paranoid 5.1

Hi all!

I'm in troubles with my S3.

I downloaded paranoid 5.1 for S3 webparanoird /legacy/i9300 (pa_i9300-5.1-20150822.zip), then I saw that I had to download GAPPS , so I downloaded: androidrootz . com/2015/03/download-android-51x-lollipop-pa-gapps.html (STOCK version), and finllay I read that was recommended to use boeffla-kernel, so I went to his web and downloaded last version (boeffla-kernel-4.0-alpha13-CM12.1-NG-i9300.recovery.zip).

After get it all, I put it in the SDCard, I when in recovery, I did Wipes: dalvik, cache and data. Then I install in this order (I read this order somewhere) ROM, then, GAPPS, then wiped cache again, finally I install Boeffla kernel. Then wiped again dalvik and cache and rebooted the phone, but before reboot TRWP said If I wanted to root the phone, so I accept. Finally, phone restart, but is in bootloop from more than 30 mins.

How can -I make run the device,??

Thanks in advance

Shudy

[Help Needed] Need paranoid android 4.6 beta 5 zip file

I need 4.6 beta 5 zip file for flashing. I would be thankful if anyone can give the link. I have tried a lot and I am unable to find it.

[ROM][Z3][LP][5.1.1_r8][SM-4.9.x] Paranoid Android 5.1 SaberMod Builds [20150806]

Z3/LEO/D6603 PARANOID ANDROID 5.1 SABERMOD BUILDS

LOLLIPOP 5.1.1_r8

BUILD 5.1 20150903 IS ONLINE.

DOWNLOAD

NOT WORKING YET: (?) YOU TELL ME.

ROM CODE COMPILED WITH LATEST SABERMOD ARM-LINUX-ANDROIDEABI 4.9.4 (20150828)
KERNEL CODE COMPILED WITH LATEST SABERMOD ARM-EABI 4.9.4 (20150828)

SOURCE: https://github.com/infected-lp/andro...974/tree/saber

[+] -O3 optimized (arm and thumb)
[+] strict-aliasing
[+] frame-pointers
[+] graphite flags
[+] LinkTimeOptimizations (-flto) flags
[+] cpu arch specific flags (armv7-a-neon)
[+] other flags to optimize even more the code.

BUGS REPORT

REPORT BUGS ONLY:

- AFTER A CLEAN INSTALL
- USING STOCK KERNEL
- USING GAPPS FROM SECOND POST
- NO MODS OF ANY SORT


BUILDBOT:

(intel core i7 3770k, asus p8z77-v, 16gb corsair vengeance pro 2133mhz cl9, msi gtx 970, 1x samsung 850 evo 256gb + 1x samsung 128gb ssd 840 pro, 4x western wigital wd3200aaks raid 10 array, samsung f1 1tb, seagate 2tb, silverstone olympia 1000w psu, antec 1200 high-tower)
(wc setup: swiftech apogee xt cpu-block, ek coolstream xtx 240 radiator, 2x scythe slipstream 120mm 1900rpm fans, swiftech mcp355 water-pump, danger den 5.25" reservoir bay)

DISCLAIMER:

These builds are freshly compiled/synced from AOSPA Legacy open-source code:

https://github.com/AOSPA-L

SPECIAL THANKS

AOSPA Dev Team = for the source code.

XDA:DevDB Information
Z3/Leo/D6603 Paranoid Android 5.1 Sabermod Builds, ROM for the Sony Xperia Z3

Contributors
infected_
Source Code: https://github.com/AOSPA-L

ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest TWRP recovery
Based On: AOSPA

Version Information
Status: Testing

Created 2015-09-04
Last Updated 2015-09-04

Rom porting- paranoid android to huawei mediapad t1 s8-701u

Hi all,,
I am using an s8-701u Huawei Mediapad t1 8.0 honor,, with rooted stock jellybean 4.3 rom (emui 1.6) and bootloader unlocked. I want to make a custom rom or use ""paranoid android" or PAC man rom on this device.
I tried to port PA 3.99 of google nexus 2013, but cant do that because i dont have a base custom rom, so i tried to cook one with android kitchen by dsixda but no luck because my device doesn't have support. So i tried to add support by ""edify" but mount points from recovery.fstab doesnt have valid mount points and i dont know what are param1 and param2 in edify,,
i am this far from porting,, please help me or i can use one of the roms available for my device with you,, if anyone have any rom for this mediapad t1 please give that to me
thanks to you all.. hoping for advice and help

No data (cellular) on Straight talk with my LG G3(VZW) running Paranoid Android

Ok so I have Paranoid Android 4.4.4 and I had upgraded to the most recent (I believe 5.1) and no matter what I did or straight talk did, I couldn't find a solution to get the data to work. I ended up having to downgrade back to 4.4.4 to get data to work. Has anyone had this issue with this phone and lollipop on Straight talk? The best I can figure is that straight talk doesn't support Android Lollipop..can anyone confirm this or post a fix to this problem? Thank you guys.

Multiple issues using Paranoid

I'm having quite a few issues with my ROM'd Z phone using Paranoid. I've recently updated to the latest version as soon as I was alerted.

1. The lock screen freezes, or rather becomes limited in responsiveness. I use the swipe up to unlock. When I swipe up, the clock/notifications just bounces and eventually the screen goes dark, then off. Sometimes I can reset using the power menu, but often the screen is totally unresponsive so I have to do a hard reset. On occasion I have to reset multiple times consecutively because it locks up immediately after boot... until its finally usable again. https://drive.google.com/open?id=0B7...lZob2Q2eHNkLU0

2. The phone gets hot in my pocket. When I notice this, often it has unlocked, turned on GPS, turned on the LED, taken photos and opened apps, or a combination of things. Sometimes even made a phone call, either to a contact or a recent from the log.

3. Recently I noticed it randomly ghost selecting right in front of me. I was unable to unlock and had to hard reset the phone.https://drive.google.com/open?id=0B7...mJhQ0FOUDdLQkE

4. I am not getting SMS alerts from Optus 321 telling me I have messages from when the phone was off, or out of service range. Often I won't know till I randomly check days later, or when I miss a call (while on another call or in service range) and they leave a message.

5. Sound drops in and out from the other party. They can always hear me. Randomly, on some calls. I can have 3 good conversations, then the next I have to call back multiple times before I get enough up time.

5a. When I'm making a call, I may not even hear the outgoing ringing tone.

6. On any new call, the the volume on my Bluetooth headset is usually down about half way. I click the Vol+ and it immediately jumps to full, the volume bar already being at full.

7. When it rings, it often takes a second or more (after the ring tone has started) for the screen to turn on.

On suggestion by a friend, I disabled a lot of notifications, but the lock screen still won't unlock even when the only thing showing is the clock.

I guess there is problems with the the phone hardware, the ROM or incompatibilities with it and an APP.

Is there some diagnostics, or an app that I can run that will log what is going on and I can have someone look at those logs for me?

paranoid android on i9300 - help needed

Hi all

I need some help.
i was on stock (rooted) with TWRP recovery and wanted to have paranoid android 5.1.

i downloaded the lasted from the paranoid android site and tried to flash. after flashing it gets stuck in bootloop.
i have tried almost all previous versions of paranoid android 5.1 but all have same results.

then i tried to get an older version of paranoid android 4.41. which went fine. still i'm not able to upgrade it to 5.1 as OTA is giving error and flashing result in same bootloop

please guide me

regards
bilal