What you will need:
I am not going to get into how to install ADB drivers, MtkDroidTools, or SP Flash Tool. If you are not experienced with rooting, flashing, etc., please do some research.
Okay, let's get started ;)
First you will need to get your phone rooted. Download KingRoot using the link above and follow this guide.
Next you will need to replace KingUser with SuperSU.
Now that we have the phone rooted and SuperSU in place, we can use MtkDroidTools to make a backup of the phone.
This video will show you how to backup your phone with MtkDroidTools (make sure you have downloaded the version I provided, as this has updated ADB files). Also make sure you enabled adbd Insecure before you connect your phone (you don't need to check enable at boot).
Hopefully you now have a backup of your phone. Now we can install a custom recovery. You can use either TWRP (rename to recovery.img) or PhilZ.
The easiest way to flash the custom recovery is with SP Flash Tool. Connect your phone (you don't need adbd Insecure enabled for this). Run flash_tool.exe as administrator. For scatter-loading File click on the Scatter-loading folder
and navigate to your MtkDroidTools backups folder. There should be a folder that starts with BLU-STUDIO-C. Open that folder and select MT6582_Android_scatter.txt. For the recovery file, navigate to the one you downloaded (TWRP or PhilZ) by clicking on the Location column next to RECOVERY.
Make sure RECOVERY is the only box checked before proceeding. Now you have your scatter file and custom recovery loaded. Click on the Download button. Nothing will happen at this point. Now shut down your phone (not restart). Once your phone shuts down completely you should see it begin to flash the custom recovery. If not, then you need to make sure you have the necessary drivers installed. Once it's complete, you can close out SP Flash Tool and disconnect your phone. After your phone is disconnected, hold down the power and volume up buttons until the recovery menu appears :good:
Post your feedback, and if you encounter any problems, please be as descriptive as possible. Good Luck :cowboy:
Credits:
- KingRoot V4.5.0.901 (latest version as of this posting)
Rooting your phone will void your warranty. - Terminal Emulator for Android
- Replace KingUser with SuperSU
- MtkDroidTools v2.5.3-updated
- adbd Insecure v2.00
- SP Flash Tool
I am not going to get into how to install ADB drivers, MtkDroidTools, or SP Flash Tool. If you are not experienced with rooting, flashing, etc., please do some research.
Okay, let's get started ;)
First you will need to get your phone rooted. Download KingRoot using the link above and follow this guide.
Next you will need to replace KingUser with SuperSU.
Now that we have the phone rooted and SuperSU in place, we can use MtkDroidTools to make a backup of the phone.
This video will show you how to backup your phone with MtkDroidTools (make sure you have downloaded the version I provided, as this has updated ADB files). Also make sure you enabled adbd Insecure before you connect your phone (you don't need to check enable at boot).
Hopefully you now have a backup of your phone. Now we can install a custom recovery. You can use either TWRP (rename to recovery.img) or PhilZ.
The easiest way to flash the custom recovery is with SP Flash Tool. Connect your phone (you don't need adbd Insecure enabled for this). Run flash_tool.exe as administrator. For scatter-loading File click on the Scatter-loading folder
and navigate to your MtkDroidTools backups folder. There should be a folder that starts with BLU-STUDIO-C. Open that folder and select MT6582_Android_scatter.txt. For the recovery file, navigate to the one you downloaded (TWRP or PhilZ) by clicking on the Location column next to RECOVERY.
Make sure RECOVERY is the only box checked before proceeding. Now you have your scatter file and custom recovery loaded. Click on the Download button. Nothing will happen at this point. Now shut down your phone (not restart). Once your phone shuts down completely you should see it begin to flash the custom recovery. If not, then you need to make sure you have the necessary drivers installed. Once it's complete, you can close out SP Flash Tool and disconnect your phone. After your phone is disconnected, hold down the power and volume up buttons until the recovery menu appears :good:
Post your feedback, and if you encounter any problems, please be as descriptive as possible. Good Luck :cowboy:
Credits:
Aucun commentaire:
Enregistrer un commentaire